On Thu, 23 Oct 1997, Tlcp wrote:
> As Jo Even Skarstein told me i fitted
> the inductor (L102) resistor (100 Ohms)
> betwin pin 14 of U20 and pin 110 of
> SDMA, and it still do NOT work with the
> Afterburner !!!!
> The inductor resistor are well connected
> because 68030 works fine actually.
This is weird, as most Falcons won't work with this patch in 030-mode...
> I also checked one more time with an
> ohm-meter the connections of teh switch,
> and some AB trck wich seem to be a bit
> destroyed, but they are not !!!!!!
>
> So I really don't Know what is the pro-
> bleme, and hope that my AB bord is not
> definaltely broken !!!
Try reversing the Nemesis-installation and see if that helps. If it still
doesn't work with the AB then the AB is broken. If the AB works without
the Nemesis, just install a clock-patch and forget the Nemesis. The
Nemesis is great on it's own, but it really doesn't work very well with
the AB, atleast not in my Falcon.
/*
** Jo Even Skarstein
http://www.stud.ntnu.no/~josk/
**
** beer - maria mckee - atari falcon - babylon 5
*/
Received on to. okt. 23 1997 - 18:54:00 CEST