Re: SCSI problems

From: Jo Even Skarstein <joska_at_nuts.edu>
Date: Tue, 9 Dec 1997 23:41:04 +0100

On Tue, 9 Dec 1997, Petr Stehlik wrote:

> When testing SCSI transfer speed with SCSI Tools I noticed that on my
> machine the speed is limited to about 950 kB/s, while on standard Falcon the
> speed is limited to about 1.8 MB/s. This is a noticeable slowdown, but it

On my Falcon I still get 1800kB/s...

> should not affect the burning (which is usually done at 300 kB/s).
> But transfer speed to SCSI devices under Linux is horrible, under 100 kB/s.
> So it is possible that by using certain programming techniques the SCSI bus
> might be really too weak on Afterburner...

...or that there's something wrong with the SCSI on your Falcon.


/*
** Jo Even Skarstein http://www.stud.ntnu.no/~josk/
**
** beer - maria mckee - atari falcon - babylon 5
*/
Received on ti. des. 09 1997 - 23:41:04 CET

This archive was generated by hypermail 2.3.0 : ti. nov. 03 2015 - 20:07:53 CET