From: Petr Stehlik <>
Date: Tue, 16 Dec 1997 08:40:24 +0100

>> But maybe I have just plugged the NOVA interface wrong (i.e. not enough,
>> because the connector from Falcon GALs to the AB board is too tall).
>I had this problem as well, it can be easily fixed by removing the
>standard connector on the card and replace it with an angled one.

I am not going to solder anything on AB... My machine is extremely sensitive
:-) I have just opened the tower case, played with the NOVA interface and
closed the tower back - and my SCSI started to make errors again (after 11
months of good work). If I soldered anything, it wouldn't even boot up, I am

Received on ti. des. 16 1997 - 12:47:00 CET

This archive was generated by hypermail 2.3.0 : ti. nov. 03 2015 - 20:07:53 CET