A few questions...

From: Ronald J. Hall <thechyld_at_pcc-uky.campus.mci.net>
Date: Mon, 2 Mar 1998 21:37:40 -0800 (PST)

  Okay, I know most (if not all) of these questions have been answered
  before, so I apologise, but please be patient...
  1) I'm not clear on this issue, do you have to boot an AB040 equipped
     Falcon from the floppy drive?
  2) I have Nemesis and an FPU. What will I lose/gain by adding the AB040
     to my setup?
  3) With an AB040 installed, you use 1/4 megs of memory in the Falcons
     memory slot, and can't use higher, right? (I understand you can add
     lots more TT/Fast Ram though)
  4) The AB040 has a pass-throught port, right? So you can use other cards
     like a Falconspeed, correct? What about more than one? For example,
     can you use an AB040, Nova card, Falconspeed? (I've got the room, I
     have a DeskTopper)
  5) About the Nova card, once its installed, can you still run RGB soft-
     ware? If not, is it easy to disable the Nova so you can? I've got a
     17" multisynch monitor that lets me run older ST games and RGB demos
     so I'd like to be able to still do that, yet gain the increased res.,
     and colors of a Nova. (800 x 600 with 16.7 million colors just sounds
     so cool!) ;-)
  Thanks in advance for any info!

      / / / / /\
     / --T-- / Sysop of The DarkForce! BBS / /\ / /
    / -A T A R I- / Phone 1-606-886-9014 Today! / Dark><Chyld / /
   / --G-- / The Fuji -still- Lives...!! / \/ / /
  /_______________/_______________/_________________/_______________/ /
Received on ti. mars 03 1998 - 19:08:00 CET

This archive was generated by hypermail 2.3.0 : ti. nov. 03 2015 - 20:07:54 CET