From: Michael Grove <>
Date: Sat, 28 Mar 1998 19:40:01 -0800 (PST)

Thought I would throw this out here.

If an NTSC Falcons video is set to run at 50Hz, is the composite output from the
video connector PAL compatible (is this a PAL signal?).

I ask because I just purchased an Expose, PAL version, and the first
test I did was to connect one of my Falcons to the composite input of
the splitter with the output in 50Hz mode and try to capture the signal
on the unit with the Expose installed. Apex couldn't sync to the
incoming signal. Tripod would capture some garbage, but that was it.
I have a dual standard VCR I have to go pickup from my brothers house,
but was just wondering if I might have other problems between an NTSC
and PAL Falcons and the Expose unit.


Received on sø. mars 29 1998 - 13:42:00 CEST

This archive was generated by hypermail 2.3.0 : ti. nov. 03 2015 - 20:07:54 CET