Re: Cubase and it's Nemesis...

From: Jo Even Skarstein <>
Date: Sun, 26 Jul 1998 00:46:08 +0200

On Sat, 25 Jul 1998, citadel wrote:

> I have HD Driver 7.52, either speed (Nemesis only)..and I have
> checked both grounding and shielding...but why Cubase only????

Probably because it's the program that stress the bus. Try switching
to monochrome (e.g. ST-High) and see if the problem persists.

> she wrote. No warning flag appears or anything. The screen
> just freezes. This only happens in Cubase at either low or high
> flicker appears to be some momentary discharge from somewhere.
> Sometimes there's a colour shift...and when it freezes it's often
> in mid-cycle so you might be left with a randomly coloured shadow
> of some screen object, etc.

Screen-flickering suggests that you have a DMA-problem. Again, try
switching to a lower resolution, preferably monochrome.

> does something different with MIDI than most other programs? Is
> it possible this problem is related to a component breaking down.
> why only problems with Cubase. Someone mentioned some weird thing
> Cubase does with MIDI..that the line going over to the MIDI chip

I've had serious problems with the 500KHz clock in Nemesis, and had to
replace it with a home-made made of a 32MHz oscillator and a
74HCT4024. They keyboard and mouse went bananas, and the Falcon was
*very* unstable. It's possible that the 500KHz-clock in your Nemesis
is starting to break as well.

** Jo Even Skarstein
** beer - maria mckee - atari falcon - babylon 5
Received on sø. juli 26 1998 - 00:46:08 CEST

This archive was generated by hypermail 2.3.0 : ti. nov. 03 2015 - 20:07:54 CET