Last night I tied the MI pin on the A/B card high, and now I
have the IDE spinning up. The noise is gone from the screen,
but no video output yet. Now I think it is time to check the
clocks with a scope now that I know the bus is at least
starting.
I tied the IPL pins as per the 060 users manual with
switches, but that didn't make any difference (yet).
Mike
Received on lø. mars 20 1999 - 16:48:05 CET
This archive was generated by hypermail 2.3.0
: ti. nov. 03 2015 - 20:07:54 CET